HP Pavilion x360 Convertible
13-u062na
PCB:
Brittle MB
15256-1
448.07m07.0011
APU:
i3-6100U SR2EU
The board consumes 30mA after supplying power. After turning on 314mA, then after about 20s it restarts and the consumption is still at the level of 314mA, after a longer moment only the fan turns to a higher speed.
It behaves the same without RAM. There is no voltage on the PL4801 (marked with a yellow border), I bet it is the APU power supply. other voltages present. No content on the matrix.
BIOS reprogrammed with the same flash and this https://www.badcaps.net/forum/showth...hlight=15256-1
hp x360 brittle MB 15256-1 448.07m07.0011 ok
15256-3.rar
APU warm. No signs of water damage.
PL4801 - 9.5Ohm
Please more experienced in solving the problem.
13-u062na
PCB:
Brittle MB
15256-1
448.07m07.0011
APU:
i3-6100U SR2EU
The board consumes 30mA after supplying power. After turning on 314mA, then after about 20s it restarts and the consumption is still at the level of 314mA, after a longer moment only the fan turns to a higher speed.
It behaves the same without RAM. There is no voltage on the PL4801 (marked with a yellow border), I bet it is the APU power supply. other voltages present. No content on the matrix.
BIOS reprogrammed with the same flash and this https://www.badcaps.net/forum/showth...hlight=15256-1
hp x360 brittle MB 15256-1 448.07m07.0011 ok
15256-3.rar
APU warm. No signs of water damage.
PL4801 - 9.5Ohm
Please more experienced in solving the problem.
Comment