Badcaps.net Forum
Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Troubleshooting TVs and Video Sources
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 08-12-2020, 02:05 PM   #1
ay_erdi
New Member
 
Join Date: Feb 2013
City & State: istanbul
My Country: turkey
Line Voltage: 220VAC 50Hz
I'm a: Knowledge Seeker
Posts: 18
Default Beko B46-LEG-6B NO View Fault

Hi friends;

TV's image completely gone.

My transactions;
https://yadi.sk/d/3fJq7VnlbL7mqA?w=1

both of led bars have been replaced.

I played flex on cof board (cof board>>tv display 6 quantity).The fault is not fixed.

I disabled it in turn;T-con >cof board between flex fault is not fixed.

Image is still distorted.

I have read;power board(DPS-214-CP)ON CN3 socket all Voltage.

I have read T-con board voltage.

Could you help me;please.
ay_erdi is offline   Reply With Quote
Old 08-30-2020, 02:40 PM   #2
ay_erdi
New Member
 
Join Date: Feb 2013
City & State: istanbul
My Country: turkey
Line Voltage: 220VAC 50Hz
I'm a: Knowledge Seeker
Posts: 18
Default Re: Beko B46-LEG-6B NO View Fault

hi guys;

will nobody help me ?
ay_erdi is offline   Reply With Quote
Old 08-31-2020, 03:03 PM   #3
dick_barton
Badcaps Veteran
 
dick_barton's Avatar
 
Join Date: Aug 2015
City & State: Cardiff
My Country: Wales
Line Voltage: 230V AC, 50Hz
I'm a: Hobbyist Tech
Posts: 6,544
Default Re: Beko B46-LEG-6B NO View Fault

Can you post your pictures of the circuit boards on this Forum and also what voltage checks have you done and what were they?
__________________
Willing to help but I'm no expert.
dick_barton is offline   Reply With Quote
Old 09-01-2020, 03:53 PM   #4
ay_erdi
New Member
 
Join Date: Feb 2013
City & State: istanbul
My Country: turkey
Line Voltage: 220VAC 50Hz
I'm a: Knowledge Seeker
Posts: 18
Default Re: Beko B46-LEG-6B NO View Fault

pictures;

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]
ay_erdi is offline   Reply With Quote
Old 09-01-2020, 03:55 PM   #5
ay_erdi
New Member
 
Join Date: Feb 2013
City & State: istanbul
My Country: turkey
Line Voltage: 220VAC 50Hz
I'm a: Knowledge Seeker
Posts: 18
Default Re: Beko B46-LEG-6B NO View Fault

view fault

view fault.jpg

t-con flex board on voltage.jpg

edit:add to photo

Last edited by ay_erdi; 09-01-2020 at 03:56 PM..
ay_erdi is offline   Reply With Quote
Old 09-03-2020, 09:26 AM   #6
dick_barton
Badcaps Veteran
 
dick_barton's Avatar
 
Join Date: Aug 2015
City & State: Cardiff
My Country: Wales
Line Voltage: 230V AC, 50Hz
I'm a: Hobbyist Tech
Posts: 6,544
Default Re: Beko B46-LEG-6B NO View Fault

That does not look good. If you remove one of the ribbons from the Tcon to the panel what is the picture like. Then reconnect the ribbon and remove the other ribbon to the panel and check the picture again.

Have you check all the voltages are correct on CN3 and CN4 of the power supply?

Last edited by dick_barton; 09-03-2020 at 09:30 AM..
dick_barton is offline   Reply With Quote
Old 09-05-2020, 12:13 PM   #7
ay_erdi
New Member
 
Join Date: Feb 2013
City & State: istanbul
My Country: turkey
Line Voltage: 220VAC 50Hz
I'm a: Knowledge Seeker
Posts: 18
Default Re: Beko B46-LEG-6B NO View Fault

I removed ribbons one by one,#5 reply view ne changed.fault goes on.

I read on CN3 socket all voltages.CN4 socket no connected the cable ,this socket is empty
ay_erdi is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2022
Powered by vBulletin ®
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 02:46 AM.
Did you find this forum helpful?