trying to fix a MSI RX580 Gaming X Plus 8GB
resistances all look normal there are no shorts on any of the rails the card powers on and all voltages are present except v core not sure where to go from here any help would be appreciated
Its uses GS7256 for memory and memory controller
https://cdn.badcaps-static.com/pdfs/...3cb0d60647.pdf
These are the voltages i got from memory
Pin 1 = 9.2
Pin 2 = 9.25
Pin 3 = 1.95
Pin 4 = 8.84
Pin 5 = 11.98
Pin 6 = 0.60
Pin 7 = 1.24
Pin 8 = 1.06
These are the voltages i got from memory controller
Pin 1 = 10.32
Pin 2 = 1.33
Pin 3 = 0.34
Pin 4 = 9.65
Pin 5 = 11.92
Pin 6 = 0.60
Pin 7 = 1.17
Pin 8 = 0.76
Its Dropout Linear Regulator Is GS7166
These are the voltages i got from it
Pin 1 = 3.3
Pin 2 = 3.3
Pin 3 = 3.3
Pin 4 = 5.0
Pin 5 = 0.0
Pin 6 = 1.8
Pin 7 = 0.68
Pin 8 = 0.0
QM3816N6 Mosfets it uses
8510
Multi-Phase Controller It uses is ir35201
https://cdn.badcaps-static.com/pdfs/...4dea35e76e.pdf
These are the voltages i got from it, not sure if anything else is needed
Enable Pin 21 = v3.3
VRDY2 Pin 4 = v3.3
VRDY1 Pin 11 = v3.3
VCC Pin 38 = v3.3
resistances all look normal there are no shorts on any of the rails the card powers on and all voltages are present except v core not sure where to go from here any help would be appreciated
Its uses GS7256 for memory and memory controller
https://cdn.badcaps-static.com/pdfs/...3cb0d60647.pdf
These are the voltages i got from memory
Pin 1 = 9.2
Pin 2 = 9.25
Pin 3 = 1.95
Pin 4 = 8.84
Pin 5 = 11.98
Pin 6 = 0.60
Pin 7 = 1.24
Pin 8 = 1.06
These are the voltages i got from memory controller
Pin 1 = 10.32
Pin 2 = 1.33
Pin 3 = 0.34
Pin 4 = 9.65
Pin 5 = 11.92
Pin 6 = 0.60
Pin 7 = 1.17
Pin 8 = 0.76
Its Dropout Linear Regulator Is GS7166
These are the voltages i got from it
Pin 1 = 3.3
Pin 2 = 3.3
Pin 3 = 3.3
Pin 4 = 5.0
Pin 5 = 0.0
Pin 6 = 1.8
Pin 7 = 0.68
Pin 8 = 0.0
QM3816N6 Mosfets it uses
8510
Multi-Phase Controller It uses is ir35201
https://cdn.badcaps-static.com/pdfs/...4dea35e76e.pdf
These are the voltages i got from it, not sure if anything else is needed
Enable Pin 21 = v3.3
VRDY2 Pin 4 = v3.3
VRDY1 Pin 11 = v3.3
VCC Pin 38 = v3.3
Comment