I'm working on my treadmill motor control board and found a short on the motor side. The rectifier SF3006PT is shorted across 2 legs. I don't believe I got it back on the heat sink properly when replacing the bridge rectifier that had gone out which lead to it getting hot and blowing about 30 mins into a jog. I've looked around and most of what I'm seeing is at least a month out from China. I'm wondering if anyone has an ideas on a suitable alternative that I could find within a week or so stateside. Below is the Mouser data sheet.
https://cdn.badcaps-static.com/pdfs/...ec9d8cb238.pdf
https://cdn.badcaps-static.com/pdfs/...ec9d8cb238.pdf
Comment