![]() |
|
|
Thread Tools | Display Modes |
![]() |
#1 |
Member
Join Date: Sep 2017
City & State: san diego
My Country: United States
I'm a: Knowledge Seeker
Posts: 22
|
![]() as described i dont get either. i forced 5 volts onto pad 3 of dc in board connector and then hookup the charger i get 0.182amps wont turn on and i still get no s4 state.
when i got this board j7000 was ripped out and i had to restore ppdcin_g3h to get to this point. |
![]() |
![]() |
![]() |
#2 |
Super Moderator
Join Date: Jan 2016
City & State: Valbonne, 06
My Country: France
I'm a: Knowledge Seeker
Posts: 3,627
|
![]() Missing PM_SLP_S4_L then I guess. All other G3H/S5/SUS rails present? Green light on Magsafe? Any pulses on PM_SLP_S4_L or other S4/S3/S0 rails?
__________________
OpenBoardView — https://github.com/OpenBoardView/OpenBoardView Last edited by piernov; 08-05-2018 at 04:48 AM.. |
![]() |
![]() |
![]() |
#3 |
Member
Join Date: Sep 2017
City & State: san diego
My Country: United States
I'm a: Knowledge Seeker
Posts: 22
|
![]() i do get a green light/g3h/s5/sus
what i dont get is pm_slp_s4_L - no pulsing s4/s3/s0 rails get a little bit of juice about 0.050v one area of 3v3_s4 goes up to 0.460v |
![]() |
![]() |
![]() |
Thread Tools | |
Display Modes | |
|
|