Announcement

Collapse
No announcement yet.

Eeprom dump thread!

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Re: Eeprom dump thread!

    nop still not working,
    I can put the code from an Emerson ELEFW328 on the board and the tv will come on fine all functions work,, except that i have to go into the service mode and change LVDS_ODD to LVDS_EVEN to correct the image..
    also the image is upside down..
    I couldn't find a way to change the model info, actually i never saw the model number listed anywhere
    couldn't find a way to flip the image in there anywhere either.

    The code from the original eeprom and the corrected eeprom you uploaded will allow the tv to come on but there is no image
    Attached Files

    Comment


      Re: Eeprom dump thread!

      So it's not the firmware of the Element ELEFW505 (the problem is in the board itself)
      I don’t understand what it means to “put the code from Emerson ELEFW328”, do you mean rearrange the SPI Flash itself with firmware from one board to another?
      What is your panel? Number of your panel (matrix).
      Last edited by lotas; 05-15-2022, 07:31 AM.

      Comment


        Re: Eeprom dump thread!

        If i take the code from the elefw328 and write it to the eeprom using the VGA connection from my RT809F programmer, the tv works fine except for the image being upside down.
        the panel is V500HJ1-RX01

        Comment


          Re: Eeprom dump thread!

          ELEFW505 has Full HD panel and ELEFW328 HD Ready. In service mode, you can not flip the image (mirror...)

          Comment


            Re: Eeprom dump thread!

            so the problem is the code from the ELEFW505

            Comment


              Re: Eeprom dump thread!

              Originally posted by RRice25541 View Post
              so the problem is the code from the ELEFW505
              The ELEFW505 dump is working, most likely it is not native, someone before you programmed a dump from another TV model there.

              Comment


                Re: Eeprom dump thread!

                Originally posted by antas View Post
                Could I get a USB firmware update for:
                TV: Walker
                MB: 17MB110P
                PB: 17IPS62
                Panel: VES315WNDA-2D-N12
                Thank you very much in advance
                Or even dump file, please?
                Last edited by antas; 05-15-2022, 09:46 AM. Reason: correcting

                Comment


                  Re: Eeprom dump thread!

                  that's very possible , I have been getting a lot of tv's lately where the owners have monkeyed around with them before they bring them in for repair.
                  so it's very possible they tried a firmware from another unit or something..
                  i guess the only way to know for sure is to get an actual dump from a working unit

                  Comment


                    Re: Eeprom dump thread!

                    Originally posted by antas View Post
                    Or even dump file, please?
                    There is a Dump ( SPI Flash MX25L1605 ) from CROWN 32289T2SM (17MB110P, VES315WNDA-2D-N12), but there is no NAND dump, do you need it?

                    Comment


                      Re: Eeprom dump thread!

                      Originally posted by lotas View Post
                      There is a Dump ( SPI Flash MX25L1605 ) from CROWN 32289T2SM (17MB110P, VES315WNDA-2D-N12), but there is no NAND dump, do you need it?
                      Yes, please?

                      Comment


                        Re: Eeprom dump thread!

                        Ok
                        Attached Files

                        Comment


                          Re: Eeprom dump thread!

                          Originally posted by lotas View Post
                          Ok
                          Thank you

                          Comment


                            Re: Eeprom dump thread!

                            Originally posted by antas View Post
                            Thank you
                            Unfortunately... Tv not working with this dump...
                            Any more ideas?

                            Comment


                              Re: Eeprom dump thread!

                              17mb110p Dumps.
                              Attached Files

                              Comment


                                Re: Eeprom dump thread!

                                ok so i think? i found the issue with the element, but I'm not 100% sure.
                                I'm hoping someone can help with some panel pinouts..

                                I don't think this unit has the correct panel type, maybe there's no difference, i don't know
                                but i think the correct panel type should be V500HJ1-PE8 and not the currently installed panel V500HJ1-XR01
                                I cannot find panel info on either of them

                                Comment


                                  Re: Eeprom dump thread!

                                  Originally posted by lotas View Post
                                  17mb110p Dumps.
                                  Thank you very much. I'll try them.

                                  Comment


                                    Re: Eeprom dump thread!

                                    Hi, I need dump for hyundai tv HY-LED39E9300
                                    TP.VST59S.PB813
                                    THANKS

                                    Comment


                                      Re: Eeprom dump thread!

                                      Originally posted by mazloum View Post
                                      Hi, I need dump for hyundai tv HY-LED39E9300
                                      TP.VST59S.PB813
                                      THANKS
                                      Post your non-working dump here, I'll fix it.

                                      Comment


                                        Re: Eeprom dump thread!

                                        Originally posted by lotas View Post
                                        Post your non-working dump here, I'll fix it.
                                        https://www.mediafire.com/file/s9y29...90615.BIN/file
                                        thanks in advanced

                                        Comment


                                          Re: Eeprom dump thread!

                                          Did you spell the TV model correctly - "HY-LED39E9300"?

                                          Comment

                                          Working...
                                          X