I have an Impression 7LSP that I donated to the school. One day, it died. I pulled it apart and saw that the capacitors had leaked in the power supply board. After watching a few on-line videos of fixing these, I dove right in and soldered in new caps on the power supply board. I plugged in the power and a computer, and the monitor came to life, the speakers work, and all is well?
Almost. The video shows five ghosts to the right of all words or vertical lines. No problem you say. It must be bad caps on the video board so I solder in all new caps on the video board. Now the colors are superb, the video is bright and clean, but the ghosts are still there. The second issue is when setting the resolution to 1280 pics, the video is off center and can't be pull from the right to the center. At 1152 pics I can center it.
Has anyone had similar issues that they have repaired?
I don't have a schematic. and don't know which circuits I should be looking at. I am guessing it must be on the video board. Any suggestions?
Almost. The video shows five ghosts to the right of all words or vertical lines. No problem you say. It must be bad caps on the video board so I solder in all new caps on the video board. Now the colors are superb, the video is bright and clean, but the ghosts are still there. The second issue is when setting the resolution to 1280 pics, the video is off center and can't be pull from the right to the center. At 1152 pics I can center it.
Has anyone had similar issues that they have repaired?
I don't have a schematic. and don't know which circuits I should be looking at. I am guessing it must be on the video board. Any suggestions?