Posted earlier today but post seems to have gone missing so here's the gist of it:
My TV is showing a 5 blink error code which, from what I have gleaned from the Internet, suggests an SC board failure. My meter, set to continuity, bleeps if I connect to the two probes of the SC2 connector. Is this a short to ground? Has the SC board failed?
My TV is showing a 5 blink error code which, from what I have gleaned from the Internet, suggests an SC board failure. My meter, set to continuity, bleeps if I connect to the two probes of the SC2 connector. Is this a short to ground? Has the SC board failed?
Comment