Re: Sharp LC60C6400U - 2 long binks, 5 short blinks error code
Not bad news for me, it's your tv. in most case the caps will discharge on there own after a couple minutes, Just don't touch that circuit if you are doing tests on other parts of the board. and don't lay the board across the metal of the tv . When you short the caps with a screwdriver, the large current and the large spike created can at a minimum blow the pfc drive ic.
It is best to check the voltage across the main caps and see what the voltage is when it is disconnected. You should use an appropriate resistor to discharge the caps.
Originally posted by Noobwithamultimeter
View Post
It is best to check the voltage across the main caps and see what the voltage is when it is disconnected. You should use an appropriate resistor to discharge the caps.
Comment