Hi guys,
Above TV has red standby led which goes out when turning on via remote or button.
No backlights, no screen or response to remote thereafter. No apparent feint image visible.
Replaced power board and main board with exact same issue pertaining. stby voltage rises to 2.7v upon power up attempt. 12v present. I couldn't detect power to the LED array.
So, logic dictates:-
I got a bad board with exact same fault.
The TV recognises a backlight failure and stops dead.
Something else I'm missing.
Any help appreciated as always
Above TV has red standby led which goes out when turning on via remote or button.
No backlights, no screen or response to remote thereafter. No apparent feint image visible.
Replaced power board and main board with exact same issue pertaining. stby voltage rises to 2.7v upon power up attempt. 12v present. I couldn't detect power to the LED array.
So, logic dictates:-
I got a bad board with exact same fault.
The TV recognises a backlight failure and stops dead.
Something else I'm missing.
Any help appreciated as always
Comment