Hi guys i repairing a acer tablet its had a bad charge port so removed that and ordered one, i then checked the positive and negative pads on the pcb there was a short still so i have tracked it down too a diode, it maybe a protection diode as its on the positive pad a few mm from the charge port positive leg, (diode marking on pcb under part) the number on part H7 which i think is a sod123 fl zener diode i dont have any, but i do have a 22v through hole zener could i use that ?
https://cdn.badcaps-static.com/pdfs/...1ddea2db45.pdf
https://cdn.badcaps-static.com/pdfs/...1ddea2db45.pdf
Comment