Hello.
Have this Dell G7 LA-E994P that after water spill and cleaning did not start.
It was get to me from other shop that clean corossion, but i dont know where.
Board have 3.3V, 5V, 1.0V, 1.8V but no RAM, CPU, GPU power and on GPU coils i measure 0.2ohm to ground, but even after removing gpu coils nothing changed. power switch works ok, but i try to measure which pin on KBC is PWSW but cannot find it
Dont have schematic
Have this Dell G7 LA-E994P that after water spill and cleaning did not start.
It was get to me from other shop that clean corossion, but i dont know where.
Board have 3.3V, 5V, 1.0V, 1.8V but no RAM, CPU, GPU power and on GPU coils i measure 0.2ohm to ground, but even after removing gpu coils nothing changed. power switch works ok, but i try to measure which pin on KBC is PWSW but cannot find it
Dont have schematic
Comment