Grundig Vision 7 42-7975 - menu pin

[betmen]

I have one old Grundig tv which is working...but it have placed 4 digit pin for chanel scanning and some other settings.
I don`t remeber pin any more so I can`t make any settings on tv.

Does anybody know how to baypass or remove pin so I don`t have to write down 9999 or so 4 digit pin combinations to find out which one is it,
I tried about 1500 so far...it is very boring and time consuming...

[Diah]

Re: Grundig Vision 7 42-7975 - menu pin

Grundig /beko pins for different purpose are
8500 2356 9301 4658 2011 2477 7493

[nomoresonys]

Re: Grundig Vision 7 42-7975 - menu pin

maybe try: start menu-storage & reset-factory data reset-confirm it-erase everything.

[nomoresonys]

Re: Grundig Vision 7 42-7975 - menu pin

if nothing works, I believe you can contact them and they will give you an over-ride code to put in.

[betmen]

Re: Grundig Vision 7 42-7975 - menu pin

It was 2356, thanks.
Without code you can`t do factory reset.

Thanks again.

[nomoresonys]

Re: Grundig Vision 7 42-7975 - menu pin

yep, there's a few ways to get around it.

[betmen]

Re: Grundig Vision 7 42-7975 - menu pin

In the input list there is no "cable" so it can`t be scaned for programs over the cable from provider.
Softvare is SSUGR.FHD.CIP.R128M.V02.T21.
Is there any new software for this tv with "cable" included?

[thommyX]

Re: Grundig Vision 7 42-7975 - menu pin

https://www.iwenzo.de/threads/grundi...kcode-2.72598/

Post 15 V23

""Abhilfe: i8500 Service Modus eingeben und im Untermenü "Option0" Punkt "DVB Type" auf "DVB-T + DVB-C" einstellen""

Greetings Thomas

[betmen]

Re: Grundig Vision 7 42-7975 - menu pin

This works, I found chanels but all chanels are stalling, they can`t be watched.
Is there any help in settings?

[thommyX]

Re: Grundig Vision 7 42-7975 - menu pin

Did a factory reset after the software update? Hope you took the FHD version too?

[betmen]

Re: Grundig Vision 7 42-7975 - menu pin

I did`n install software, just made adjustment in factory menu Option0 from "DVB Type" to "DVB-T + DVB-C", then made factory reset and I can scan chanels over cable.
Chanels are there but all of them are stalling and like that can`t be wached.

[betmen]

Re: Grundig Vision 7 42-7975 - menu pin

Today I install software V23, FHD version, made factory reset, found chanels, but all chanels are stil stalling...
When I connect USB stick with video file it is played normaly.
Anibody know what is the problem?

[nomoresonys]

Re: Grundig Vision 7 42-7975 - menu pin

tuner might have gone bad.

[betmen]

Re: Grundig Vision 7 42-7975 - menu pin

tuner might have gone bad.

Radio stations works fine.

[nomoresonys]

Re: Grundig Vision 7 42-7975 - menu pin

that's lucky, none of my tvs even get radio.

[nomoresonys]

Re: Grundig Vision 7 42-7975 - menu pin

can you describe the "stalling"?

[nomoresonys]

Re: Grundig Vision 7 42-7975 - menu pin

did the channels stay in memory, meaning if you turn it off wait a bit turn it back on the channels are still there?

[nomoresonys]

Re: Grundig Vision 7 42-7975 - menu pin

can you play something over the hdmi?

[betmen]

Re: Grundig Vision 7 42-7975 - menu pin

can you describe the "stalling"?

Channels are played for 1-2 second then picture freezes for about 10-15 second or longer, then working agaain 1-2 sec and so on.
All channels stays in memory, and over HDMI like over USB working fine.
In factory menu I can`t open Option3 (don`t know what is in there).

[nomoresonys]

Re: Grundig Vision 7 42-7975 - menu pin

wonder if a service remote would help fix it.