Announcement

Collapse
No announcement yet.

recover data from micro sd soldering wires

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    recover data from micro sd soldering wires

    hi, dunno if this is the right thread place, but im wondering if someone had a problem with an sd by recognized after about 30 mins , but unable to recover data even after 1 hour..... on mobile phone it isnt recognized and phone ask for a password (it didnt had any kind of password set). i tried already all data recovery, but i think more i use the sd more it will get damaged. even after pc see the capacity, program lfor data recovery stay at 0% scan after 1 hour, so i left qnd quit the process.

    now im asking if any of you know how to solder wires on sd and what i need to connect to pc. ive seen some video, but or they are adapter u need to buy and are not cheap, or some arduino homemade reader, but cant find any schematic or good guide to look at.

    #2
    Re: recover data from micro sd soldering wires

    onboard flash?
    Cap Datasheet Depot: http://www.paullinebarger.net/DS/
    ^If you have datasheets not listed PM me

    Comment


      #3
      Re: recover data from micro sd soldering wires

      wikipedia has the pinout for all sizes and types of sd cards: https://en.wikipedia.org/wiki/SD_card#Transfer_modes

      however, it looks like the issue is that the card has failed and all the data is gone and corrupted. data recovery from failed flash mem devices is very difficult and most likely impossible because the data has drifted by one or a few bits due to voltage drift corrupting the data bit levels so u'll most likely end up with garbage data. thats why im still sticking to spinning rust for all my personal data archiving purposes.

      Comment


        #4
        Re: recover data from micro sd soldering wires

        Originally posted by chaoslegionnaire View Post
        thats why im still sticking to spinning rust for all my personal data archiving purposes.
        100%!!
        <--- Badcaps.net Founder

        Badcaps.net Services:

        Motherboard Repair Services

        ----------------------------------------------
        Badcaps.net Forum Members Folding Team
        http://folding.stanford.edu/
        Team : 49813
        Join in!!
        Team Stats

        Comment


          #5
          Re: recover data from micro sd soldering wires

          tnx for reply... i was talking about something like that :

          https://www.youtube.com/watch?v=jjB6wliyE_Y

          and looks like it will get almost all data on the damaged sd. ive seen also using arduino as reader, but dont have any schematic, tutorial or so to make it and give it a try.

          Comment


            #6
            Re: recover data from micro sd soldering wires

            you could freeze the card and then dump it as a sector-dump with DD in Linux.

            Comment


              #7
              Re: recover data from micro sd soldering wires

              Originally posted by dellxps15 View Post
              tnx for reply... i was talking about something like that :

              https://www.youtube.com/watch?v=jjB6wliyE_Y

              and looks like it will get almost all data on the damaged sd. ive seen also using arduino as reader, but dont have any schematic, tutorial or so to make it and give it a try.
              yeah i'm wondering how he knows which points on the card on the right ones for data
              Cap Datasheet Depot: http://www.paullinebarger.net/DS/
              ^If you have datasheets not listed PM me

              Comment


                #8
                Re: recover data from micro sd soldering wires

                Originally posted by Uranium-235 View Post
                yeah i'm wondering how he knows which points on the card on the right ones for data
                there is a site that has most of the sd card pinout

                Comment


                  #9
                  Re: recover data from micro sd soldering wires

                  Originally posted by dellxps15 View Post
                  tnx for reply... i was talking about something like that :

                  https://www.youtube.com/watch?v=jjB6wliyE_Y

                  and looks like it will get almost all data on the damaged sd. ive seen also using arduino as reader, but dont have any schematic, tutorial or so to make it and give it a try.
                  I hope you have the solder skills, a steady hand and a good microscope
                  Cap Datasheet Depot: http://www.paullinebarger.net/DS/
                  ^If you have datasheets not listed PM me

                  Comment


                    #10
                    Re: recover data from micro sd soldering wires

                    Good soldering skills or you purchase one of these micro probe stations:

                    US $13.00 | Probe Data Recovery SD Memory Card Flyline PC3000FE Chip SSD Electronic Test Tool


                    https://a.aliexpress.com/_m0ZYUf7

                    Comment


                      #11
                      Re: recover data from micro sd soldering wires

                      Originally posted by mon2 View Post
                      Good soldering skills or you purchase one of these micro probe stations:

                      US $13.00 | Probe Data Recovery SD Memory Card Flyline PC3000FE Chip SSD Electronic Test Tool


                      https://a.aliexpress.com/_m0ZYUf7
                      that is pretty fucking cool
                      Cap Datasheet Depot: http://www.paullinebarger.net/DS/
                      ^If you have datasheets not listed PM me

                      Comment


                        #12
                        Re: recover data from micro sd soldering wires

                        wow that looks like some kind of a serious brain surgery lobotomy device!! funny how they ported medical instruments to fix electronics also. lmao!!

                        Comment

                        Working...
                        X