For the TV from the title (Lg 42LD450-ZA) which was damaged by the motherboard during the thunderstorm, I got the board from China. The board is the same model but for the Chinese area, the Chinese TV model is 42LD450-CA.
The old board and the Chinese are identical, only this Chinese has a different tuner.
Everything worked great, except of course DVB-t because the tuner is different (probably they have a different standard)
The devil did not give me peace so I went to insert the software from the European version (Lg42LD450-ZA), everything went fine, the tv recognized the file, done the right upload, but after the restart tv does not work, only the logo shows, restart and so on in a circle,
Can anything be done, go back to at least Chinese sw, it can no longer be accessed in the menu where sw with usb is installed
The TV responds to the ignition with both the remote and the button (meaning it's not completely dead), but it goes up to the log and restarts ...
The old board and the Chinese are identical, only this Chinese has a different tuner.
Everything worked great, except of course DVB-t because the tuner is different (probably they have a different standard)
The devil did not give me peace so I went to insert the software from the European version (Lg42LD450-ZA), everything went fine, the tv recognized the file, done the right upload, but after the restart tv does not work, only the logo shows, restart and so on in a circle,
Can anything be done, go back to at least Chinese sw, it can no longer be accessed in the menu where sw with usb is installed
The TV responds to the ignition with both the remote and the button (meaning it's not completely dead), but it goes up to the log and restarts ...
Comment