Announcement

Collapse
No announcement yet.

Cello C55ANSMT-4K CURVE V2

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Cello C55ANSMT-4K CURVE V2

    Hi guys I need some help please,
    I have a Cello C55ANSMT-4K CURVE V2, that won't turn on just red standby light, yes I think it's software as I purchased another board but the screen number is slightly different and now it will turn on but with a double image (side by side), I was wondering if any of you great guys could look at both dumps and correct the corruption or somehow make the newer one work with the correct screen info

    Replacement screen number (LSC550FN21)
    Original screen number (LSC550FN07-W)
    Main board is a (MSD3458.C1V5.0)

    Thanks guys
    Gary

    #2
    Re: Cello C55ANSMT-4K CURVE V2

    Not exactly sure but it looks like your mainboard is for a 50 inch tv and your panel is 55, don't know if it can be fixed with firmware. msd3458.c1v5.0 main av board for panel LSC500GJ02 EL5694 s2

    Comment


      #3
      Re: Cello C55ANSMT-4K CURVE V2

      Hi there nomoresonys the board I purchased was for a CELLO Platinum 55” 4K so they are both 55” Samsung panels just a bit different lol
      Basically I need the boot up part from the cello Platinum stitched to the original if it can be done or the original fixed somehow

      Comment


        #4
        Re: Cello C55ANSMT-4K CURVE V2

        I have both dumps but you'll probably only need u4

        Comment


          #5
          Re: Cello C55ANSMT-4K CURVE V2

          here you go. if it works i accept payment in beer
          Attached Files

          Comment


            #6
            Re: Cello C55ANSMT-4K CURVE V2

            Originally posted by Hamie View Post
            I have both dumps but you'll probably only need u4
            Could you please pass over u25 as well please Hamie just in case thanks

            Comment


              #7
              Re: Cello C55ANSMT-4K CURVE V2

              Originally posted by Hamie View Post
              here you go. if it works i accept payment in beer
              Is it for the correct screen as well please Hamie

              (LSC550FN07-W)

              Comment


                #8
                Re: Cello C55ANSMT-4K CURVE V2

                Hamie I took u25 off of the replacement board and placed it on the original board and it boots up with a double screen I think it's u25 that I need and yes beer tokens on the cards
                Thanks Hamie

                Comment


                  #9
                  Re: Cello C55ANSMT-4K CURVE V2

                  Ok I'll get U25 sent to you tomorrow.
                  I've not taken a copy of it yet but have a working board here.

                  Comment


                    #10
                    Re: Cello C55ANSMT-4K CURVE V2

                    I'll check the panel too

                    Comment


                      #11
                      Re: Cello C55ANSMT-4K CURVE V2

                      Originally posted by Hamie View Post
                      I'll check the panel too
                      Many thanks Hamie

                      Regards
                      Gary

                      Comment


                        #12
                        Re: Cello C55ANSMT-4K CURVE V2

                        Ok, maybe MSD3458.C1V5.0 is one of the generic board numbers, example: https://www.electromix.co.uk/main-pc...el5694-s2.html
                        Last edited by nomoresonys; 07-01-2020, 04:36 PM.

                        Comment


                          #13
                          Re: Cello C55ANSMT-4K CURVE V2

                          Originally posted by nomoresonys View Post
                          Ok, maybe MSD3458.C1V5.0 is one of the generic board numbers.
                          I think it is sir,
                          A bit like Vestel rubbish same board different screen size, different makes etc

                          This Goodmans one is exactly the same as the Cello make
                          Cello are here in the uk, and are no help at all
                          They make cello, goodmans, Ferguson, platinum, to name but a few

                          Thank you for your valuable input though

                          Comment


                            #14
                            Re: Cello C55ANSMT-4K CURVE V2

                            u25
                            Attached Files

                            Comment


                              #15
                              Re: Cello C55ANSMT-4K CURVE V2

                              panel was LSC550FF06

                              but worth a shot.

                              Comment


                                #16
                                Re: Cello C55ANSMT-4K CURVE V2

                                Originally posted by Hamie View Post
                                u25
                                You're a star mate it works 👍👍👍👍👍👍

                                I will pm you

                                Comment


                                  #17
                                  Re: Cello C55ANSMT-4K CURVE V2

                                  If you have u25 for this LSC550FN21
                                  Upload it here then all bases are covered in the thread for this tv for future reference

                                  Comment


                                    #18
                                    Re: Cello C55ANSMT-4K CURVE V2

                                    Nice work.

                                    Comment


                                      #19
                                      Re: Cello C55ANSMT-4K CURVE V2

                                      Hi all. This is interesting. I have the same board. Also stuck in standby. The 40" 4K non curve. Model C40ANSMT-4K. Screen is LSC400FN07-W. I don't suppose anyone would have the U4 and U25 dumps for this pile of crap ? Many thanks in advance.

                                      Comment


                                        #20
                                        Re: Cello C55ANSMT-4K CURVE V2

                                        I think U4 is the same.
                                        U25 has the screen type so wont work.
                                        I had one bricked with u4 being the fault.

                                        Comment

                                        Working...
                                        X