Synology DS218Play

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • osman68i
    Badcaps Veteran
    • May 2015
    • 338
    • The Netherlands
    #1

    Synology DS218Play

    Hi ,


    is it possible to change the serial and mac adres of this unit?

    i can find the serial, i change a few numbers,

    synology assistant recognize the unit but serial is empty.

    when I rollback the original serial assistant recognizing the unit and the serial.
    Attached Files
    Tags: None
    • stj
      Great Sage 齊天大聖
      • Dec 2009
      • 30963
      • Albion
      #2
      Re: Synology DS218Play

      the MAC may be in a 93' series eeprom next to the ethernet controller

        Comment

        • SluggerB
          Badcaps Veteran
          • Aug 2020
          • 747
          • US
          #3
          Re: Synology DS218Play

          Originally posted by osman68i
          Hi ,


          is it possible to change the serial and mac adres of this unit?

          i can find the serial, i change a few numbers,

          synology assistant recognize the unit but serial is empty.

          when I rollback the original serial assistant recognizing the unit and the serial.
          I had a Synology router, and you need to use the Assistant software to view/change anything, AND the correct version of that software for the unit you have.

          I had to email Synology support the S/N of my unit (which I got off the sticker) and they sent me a link to the correct download.

            Comment

            • chipmaster86
              New Member
              • Dec 2013
              • 7
              • USA
              #4
              Re: Synology DS218Play

              MAC and Serial are located on the daughter board. That little tiny board with the standoffs on it. Copy the checksum too, or it won't boot.

                Comment

                • chipmaster86
                  New Member
                  • Dec 2013
                  • 7
                  • USA
                  #5
                  Re: Synology DS218Play

                  OOps. Almost forgot. As its been awhile since I had a play in shop. If yours doesn't have the daughter board, then its in the bios. Just extract the bios, and search for term "SN=". Mac address too is right next to it. Also copy the CHKSM over as well. Should be like 3 digits.

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • ngml
                      Repair of an LG split AC system indoor unit PCB
                      by ngml
                      I am trying to repair an LG split AC indoor unit, which does not start and gives a CH05 error code.
                      This indicates an error in the communication between the outdoor and the indoor unit.
                      The outdoor unit is fine, so the problem is the indoor PCB.
                      The indoor unit is an LG PC09SQ NSJ (3SNM09JA2FA), and the PCB has the following type number: EAX35907219-1.2 (see photo1)
                      I changed optocouplers ICO1X & ICO2X and the NPN transistor S9013 which drives optocoupler ICO2X (see photo2), but this did not remedy the fault.

                      Does anybody have the schematics of this board,...
                      2 Photos
                      02-01-2025, 12:55 PM
                    • Dannyx
                      UART (serial ?) splitter ?
                      by Dannyx
                      Good day folks. I got a project on hand and would like some thoughts on whether it's possible to achieve, albeit impractical. You know me - I like to over-complicate stuff

                      The setup: I got a Paradox EVO192 alarm panel, a serial-to-ethernet adapter and an official PCS250 GSM communicator.

                      The task (TL/DR): connecting both the ethernet adapter AND the communicator to the single serial port of the Paradox panel. Connecting their TX/RX lines in parallel the data would get all messed up. At the very most, I THINK I could parallel the RX pins of the ethernet adapter...
                      08-18-2023, 03:21 PM
                    • baletak
                      Lenovo T490 - motherboard serial - windows licence lost - after corrupt bios chip replacement
                      by baletak
                      Hi,
                      had T490 with faulty bios chip. Bought chip out of ebay and soldered on. Laptop starts and works however serial numbers of laptop and motherboard do not match.
                      I have updated laptop model number.

                      1) I did not find the way to update laptop serial number - I have this one.
                      2) I dont know where to get my motherboard serial number and how to update it. Is it somewhere physically on the mainboard? How do I update it?

                      Hope to find someone to help me with this as I am hitting dead end at the moment.

                      Many thanks

                      Miro
                      05-23-2025, 01:21 AM
                    • andrhouseolly
                      Lenovo X240 - motherboard replacement for X250, no image.
                      by andrhouseolly
                      Friends. I beg you to help me in this situation.
                      Lenovo X240 with a video problem. Native Intel drivers are not installed,
                      after installation, a black screen. It works with the standard Microsoft driver.
                      Understanding that there are problems with the video core,
                      I ordered a motherboard from Lenovo X250.
                      The laptop turns on, starts up, there is no image on the internal display.
                      The image is output to the external monitor.
                      I ordered another motherboard from Lenovo X250.
                      The laptop turns on, starts up, there is no image on the internal display.
                      ...
                      07-12-2024, 03:02 PM
                    • spleenharvester
                      Synology MR2200ac mesh router, UART connection - login details?
                      by spleenharvester
                      This particular unit powers up, LEDs behave normally, but broadcasts no SSID, will not mesh with any other routers. Plugging in an ethernet cable from a Windows laptop results in "unidentified network" with an autoconfigured IP address and no response to pinging 192.168.1.1.

                      I was able to log into serial/UART by connecting the 6-pin header to the GPIO on a Raspberry Pi Zero W (GND to GND, TxD to RxD, RxD to TxD, no connection between +3.3V as it is supplied on both sides) using Minicom, command:

                      Code:
                      sudo minicom --baudrate 115200 --device /dev/ttyS0
                      ...
                      09-02-2024, 01:19 PM
                    • Loading...
                    • No more items.
                    Working...