Announcement

Collapse
No announcement yet.

Anyone tried or got the Aixun T3A with the T245 pen?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Anyone tried or got the Aixun T3A with the T245 pen?

    On the recent sale I've ordered a new Aixun T3A with the T245 soldering pen and it comes with the fancy pen holder. Wonder if anyone has one and if your happy with it? It's got some decent reviews. On YouTube a guy compared it with the JBC and results were pretty darn good fur such a cheap rig.

    #2
    Re: Anyone tried or got the Aixun T3A with the T245 pen?

    I'm very happy with mine.

    Comment


      #3
      Re: Anyone tried or got the Aixun T3A with the T245 pen?

      I should get mine soon. Hope it is as good as everyone sez it is.

      Comment


        #4
        Re: Anyone tried or got the Aixun T3A with the T245 pen?

        damn, i forgot about that - i should have got one on the 11:11 sale

        not that i wasnt blowing cash though,
        ordered this because it blows away a logic probe and is tiny.
        https://www.aliexpress.com/item/1005001969702720.html

        and this - just because
        https://www.aliexpress.com/item/1005003028392011.html

        Comment


          #5
          Re: Anyone tried or got the Aixun T3A with the T245 pen?

          stj, you still did pretty darn good with those items. I didn't even know about that Radtel. Dang! Yep, I picked up that Aixun T3A on that sale and I've got me two Shelly plus one's. One of them is going into my air exchanger

          https://www.aliexpress.com/item/1005...d=TGZAHBIOM2Cd

          https://www.shelly.cloud/en/products/shop/shelly-plus-1
          Last edited by CapLeaker; 12-04-2022, 06:06 PM.

          Comment


            #6
            Re: Anyone tried or got the Aixun T3A with the T245 pen?

            the shelly looks good, i presume your going to flash it with Tasmota.

            Comment


              #7
              Re: Anyone tried or got the Aixun T3A with the T245 pen?

              I guess that depends on what I am going to control with the Shelly. The one that goes on my air exchanger, probably not. I just want it to run on a schedule. The second one I am going to play with for a while. This one I am going to at least try Tasmota and see how that goes.

              Comment


                #8
                Re: Anyone tried or got the Aixun T3A with the T245 pen?

                Finally my Aixun T3A arrived. Pretty impressive little thing for its size and heats up in 3 seconds flat. Haven’t used it on any serious soldering job yet, but on all the things I used it it on so far it worked really good. If there is anything bad I can say about it so far is putting the foam on the T3A handle.

                Comment


                  #9
                  Re: Anyone tried or got the Aixun T3A with the T245 pen?

                  well, the radtel is surprisingly good - and very compact!
                  but the charger is a joke and it's psu - lets just say hell-no!

                  psu is well built but the transformer is 12mm square - no way i'm trusting the seperation/isolation on that!

                  the charger base uses descrete current limiting and has a voltage reference and comparater to control the led colour!!
                  it's also only 400mA so slow as fuck.

                  i already stripped the board and added a TP5100 module for controlled 1A charging

                  Comment


                    #10
                    Re: Anyone tried or got the Aixun T3A with the T245 pen?

                    I guess you MUST post pictures. Sounds interesting!

                    Comment


                      #11
                      Re: Anyone tried or got the Aixun T3A with the T245 pen?

                      damn, i forgot to take pictures before i closed it - o.k. i'll open it again later

                      Comment


                        #12
                        Re: Anyone tried or got the Aixun T3A with the T245 pen?

                        I have also a new projects on my to do list. One of them is to convert an AliExpress UV eraser that works on 220V over to 110V using the voltage doubler trick with a full bridge rectifier and 2 capacitors.

                        Comment


                          #13
                          Re: Anyone tried or got the Aixun T3A with the T245 pen?

                          or just buy a ballast?

                          Comment


                            #14
                            Re: Anyone tried or got the Aixun T3A with the T245 pen?

                            shit radio charger
                            Attached Files

                            Comment


                              #15
                              Re: Anyone tried or got the Aixun T3A with the T245 pen?

                              Wtf? That came with the Radtel? Really really? How is the radio itself?

                              Comment


                                #16
                                Re: Anyone tried or got the Aixun T3A with the T245 pen?

                                radio is fine
                                https://chirp.danplanet.com/attachments/7910
                                https://chirp.danplanet.com/attachments/7911
                                https://chirp.danplanet.com/attachments/7750
                                https://chirp.danplanet.com/attachments/7912

                                Comment


                                  #17
                                  Re: Anyone tried or got the Aixun T3A with the T245 pen?

                                  These links give me an empty page?

                                  Comment


                                    #18
                                    Re: Anyone tried or got the Aixun T3A with the T245 pen?

                                    https://chirp.danplanet.com/issues/9665

                                    Comment


                                      #19
                                      Re: Anyone tried or got the Aixun T3A with the T245 pen?

                                      That worked perfect!

                                      Comment

                                      Working...
                                      X