Announcement

Collapse
No announcement yet.

Bakon 950d problem

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Bakon 950d problem

    I have a problem with the Bakon 950d soldering station. It worked for many years without a problem, now it warms up to the set temperature and displays the error S - E. I noticed that the MOSFET AOD425 reaches a very high temperature. Where could be the problem?
    Attached Files
    Last edited by tmks2; 04-06-2023, 05:32 PM.

    #2
    Re: Bakon 950d problem

    There is some information here https://www.badcaps.net/forum/showthread.php?t=66287

    Sensor - Error
    The mosfet controls the element, so it is likely full ON and not turning off due to the sensor error.

    Comment


      #3
      Re: Bakon 950d problem

      i tried different solder tips, still the same problem.

      Comment


        #4
        Re: Bakon 950d problem

        The fault seems to be with the seating of the element, not the solder tip.
        Check this video https://www.youtube.com/watch?v=dvzHYdzb0XQ

        Comment

        Working...
        X