only few months new caps on my amp and today i want to set the bias and amp going in protect mode and start smoke.imediatly shout down open it and found this!!!!!! leak from one capacitor desolder and see two holes on the can.i suspect was there from beginning from transport maybe?the holes is from out to in is like a nail pin not like from screwdriver.realy angry about that.
Announcement
Collapse
No announcement yet.
hole on cap
Collapse
X
-
Re: hole on cap
thanks. this is a cautionary tale for me not to use dented, holey or pierced caps. i've always wondered if it was okay to continue using them or to recap them at once. this answers my question. i shall stop using those stuff with dented, holey and pierced caps and recap them whenever i get the chance or spare time.
Comment
-
Re: hole on cap
yes i measure the legs from the cap and fits excactly on the two holes.wrong package and during transport hit each other. if i remember correctly the packet was to big and include some other smal components i have ordered semicontuctors and so on.is a wonder hold so long the cap.don't use a lot the amp since last winter maybe 50-60 hours til now.
Comment
Comment