Announcement

Collapse
No announcement yet.

emerson Jacuzzi capacitor 3 pin 25UF 250v

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    emerson Jacuzzi capacitor 3 pin 25UF 250v

    emerson k37Gwblc-607

    Y660000 Jacuzzi Pump

    has a 25UF 250V cap with 3 pin (see picture)

    was wondering if this would be the direct replacement as the original cap was custom made and never sold.

    https://www.digikey.com/en/products/...HQA415/2231516

    other than that, I can't find anything at all.
    Attached Files

    #2
    Re: emerson Jacuzzi capacitor 3 pin 25UF 250v

    Check the two pins next to each other and see if they have a electrical connection ( 0 ohms ) if it does have one yes it should be the same

    As long as the UF value and the voltage value are the same
    Last edited by sam_sam_sam; 10-31-2020, 06:52 AM.
    9 PC LCD Monitor
    6 LCD Flat Screen TV
    30 Desk Top Switching Power Supply
    10 Battery Charger Switching Power Supply for Power Tool
    6 18v Lithium Battery Power Boards for Tool Battery Packs
    1 XBox 360 Switching Power Supply and M Board
    25 Servo Drives 220/460 3 Phase
    6 De-soldering Station Switching Power Supply 1 Power Supply
    1 Dell Mother Board
    15 Computer Power Supply
    1 HP Printer Supply & Control Board * lighting finished it *


    These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

    1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
    2 Hem Saw Computer Stack Board

    All of these had CAPs POOF
    All of the mosfet that are taken out by bad caps

    Comment


      #3
      Re: emerson Jacuzzi capacitor 3 pin 25UF 250v

      Originally posted by sam_sam_sam View Post
      Check the two pins next to each other and see if they have a electrical connection ( 0 ohms ) if it does have one yes it should be the same

      As long as the UF value and the voltage value are the same
      Yes.. I feel stupid now.. thank you so much

      Comment


        #4
        Re: emerson Jacuzzi capacitor 3 pin 25UF 250v

        Originally posted by Brucetafer View Post
        Yes.. I feel stupid now.. thank you so much
        It is better to check for the information than to do something blindly
        9 PC LCD Monitor
        6 LCD Flat Screen TV
        30 Desk Top Switching Power Supply
        10 Battery Charger Switching Power Supply for Power Tool
        6 18v Lithium Battery Power Boards for Tool Battery Packs
        1 XBox 360 Switching Power Supply and M Board
        25 Servo Drives 220/460 3 Phase
        6 De-soldering Station Switching Power Supply 1 Power Supply
        1 Dell Mother Board
        15 Computer Power Supply
        1 HP Printer Supply & Control Board * lighting finished it *


        These two repairs where found with a ESR meter...> Temp at 50*F then at 90*F the ESR reading more than 10%

        1 Over Head Crane Current Sensing Board ( VFD Failure Five Years Later )
        2 Hem Saw Computer Stack Board

        All of these had CAPs POOF
        All of the mosfet that are taken out by bad caps

        Comment


          #5
          Re: emerson Jacuzzi capacitor 3 pin 25UF 250v

          Originally posted by sam_sam_sam View Post
          It is better to check for the information than to do something blindly
          I need to get that tattooed on the back of my girlfriend's hand lol!!

          Comment


            #6
            Re: emerson Jacuzzi capacitor 3 pin 25UF 250v

            Hi
            I came across your post and I am looking for a capacitor compatible with the same Emerson Jacuzzi pump. Were you able to find one?

            Thanks in Advance
            Dan

            Comment


              #7
              Re: emerson Jacuzzi capacitor 3 pin 25UF 250v

              These are common pump, fan, motor capacitors from china. Search for "CBB61 25uF" and you need at least a 240VAC rating.

              BUT the Emerson is oddball having three spade terminals. Most common is two terminals and others have four, where the pair at each end are just connected together to simplify factory wiring. There are also flying leads versions out there. If you use a two terminal part, the two wires at the end (of the old part) need to be connected together.

              The Nichicon EEC2E256HQA415 part at Digi-Key https://www.digikey.com/en/products/...HQA415/2231516 $16 is better quality and just leave the extra terminal unconnected/unused.

              Otherwise, roll the dice and search Amazon or Aliexpress for the cheap stuff.

              Comment

              Working...
              X