Badcaps.net Forum
Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Troubleshooting Power Supplies and Power Supply Design
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-27-2020, 02:36 AM   #13
beetle1303
Senior Member
 
Join Date: Jul 2019
City & State: Singapore
My Country: Singapore
Line Voltage: 230VAC 60Hz
I'm a: Knowledge Seeker
Posts: 169
Default Re: Tefal GV8962 Pro Express steam iron - no power

Quote:
Originally Posted by budm View Post
So now you are saying the resistance on C2 no longer show 30 Ohms?
Do you have 24Vdc on C2?
You also need to find out if you also have low Voltages to runs those IC or not
Yes, D3 no longer show 30ohm. It shows 532ohm in resistance mode, and 579 in diode mode.

C2 shows 0.1v and U1 shows 0.2v between Drain pin and each of all other pins.

Pressing the BP5 Power on/off button has no effect..
beetle1303 is offline   Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2021
Powered by vBulletin ®
Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 04:54 AM.
Did you find this forum helpful?