At the risk of sounding like a half a$$ed fix.. When i cant ID a part like that I usually look for an exact size match off a donor board, 9 times out of 10 the value is close enough that the circuit just dosent care.
What is the P/N of that ICD3?
i should be the same capacitance of the cap used on the left side of the board where it is connected to the same type of 6-pin IC on the left side..
At the risk of sounding like a half a$$ed fix.. When i cant ID a part like that I usually look for an exact size match off a donor board, 9 times out of 10 the value is close enough that the circuit just dosent care.
What is the P/N of that ICD3?
i should be the same capacitance of the cap used on the left side of the board where it is connected to the same type of 6-pin IC on the left side..
Does the tcon work without the cap ? You may have other problems beside it.
I have not tried it yet. I was going to hook it up to my bench supply and see if it has any other shorts. I have a replacement on the way. I like to try and fix things like this to learn.
I was able to hookup 12 volts to the board and nothing over heated. I have a new hot air station coming. I will see if I can find out what value CD3011 is.
Comment