Hi, I have an A1990 board 820-01041-A, no corrosion or liquid.
The NANDs on the left (immediately are getting warm after 10 seconds or so, then get hot) - no power. The trackpad was clicking, after trying DFU revive it doesn't click any longer.
Board is taking 20V and bouncing between 0.1A and 0.7A
PPBUS_G3H is present bouncing between 10.6V and 12.5V
PP2V5_NAND_SSD0 is shorted to ground
PP1V8_SSD0 is present 1.8V
I will check tomorrow under thermal camera once I am back in the shop, with my novice knowledge does this mean SSD is dead?
The NANDs on the left (immediately are getting warm after 10 seconds or so, then get hot) - no power. The trackpad was clicking, after trying DFU revive it doesn't click any longer.
Board is taking 20V and bouncing between 0.1A and 0.7A
PPBUS_G3H is present bouncing between 10.6V and 12.5V
PP2V5_NAND_SSD0 is shorted to ground
PP1V8_SSD0 is present 1.8V
I will check tomorrow under thermal camera once I am back in the shop, with my novice knowledge does this mean SSD is dead?
Comment