Announcement

Collapse
No announcement yet.

Apple 85W MagSafe Power Adapter - blown - help with component identification

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #21
    Re: Apple 85W MagSafe Power Adapter - blown - help with component identification

    Here I found a diagram on the A1424, maybe it will help in something.
    Attached Files

    Comment


      #22
      Re: Apple 85W MagSafe Power Adapter - blown - help with component identification

      Originally posted by lotas View Post
      Here I found a diagram on the A1424, maybe it will help in something.
      Awesome thanks. I will check through this and see how much of it is accurate for the A1343.

      Comment


        #23
        Re: Apple 85W MagSafe Power Adapter - blown - help with component identification

        Originally posted by lotas View Post
        Here I found a diagram on the A1424, maybe it will help in something.
        Just did a brief check through it, and found the following section (see image) which pretty closely matches the section of the circuit that I am trying to find the value for the burned resistor.

        I think a value of 0.18ohm for R051 in my case (R26 for the A1424) is what I am going to go with, as my gut feel was 0.17ohm based on what I could still idntify from the resistors burned marking. Thanks again foir posting this!
        Attached Files

        Comment

        Working...
        X