Hi,
I just got this motherboard as "not working", and indeed it seems to have a problem. Both power connectors are plugged, the power led under the lower PCI slot is on, if I switch the "Turbo_Key_II" a red led turns on, so there's power through the board. Yet, it's not reacting when I short the "PWRSW" pins. The PSU fan isn't starting either.
So far I have only tested it without RAM, CPU or video card but it should at least start up and make the fans spin. At least to my knowledge (I have over 100 motherboards around) unless there's some kind of security with modern boards ? I doubt it.
Where should I look at ? There's no physical damage.
I have a Celeron G1620 that should arrive shortly.
I just got this motherboard as "not working", and indeed it seems to have a problem. Both power connectors are plugged, the power led under the lower PCI slot is on, if I switch the "Turbo_Key_II" a red led turns on, so there's power through the board. Yet, it's not reacting when I short the "PWRSW" pins. The PSU fan isn't starting either.
So far I have only tested it without RAM, CPU or video card but it should at least start up and make the fans spin. At least to my knowledge (I have over 100 motherboards around) unless there's some kind of security with modern boards ? I doubt it.
Where should I look at ? There's no physical damage.
I have a Celeron G1620 that should arrive shortly.
Comment