Hello.
HAve this MSI MS16J11 that have no 3.3V/5V. i found that SUS_ON signal was shorted by IC PU10. so i replace ic, now have SUS_ON - 3.3V, but absolute no reaction on 3VSUS and 5VSUS. I have REG3/5 ok, i have win, i check all mosfets. all looks good but this crap still wont release SUS voltages.
any hint?
HAve this MSI MS16J11 that have no 3.3V/5V. i found that SUS_ON signal was shorted by IC PU10. so i replace ic, now have SUS_ON - 3.3V, but absolute no reaction on 3VSUS and 5VSUS. I have REG3/5 ok, i have win, i check all mosfets. all looks good but this crap still wont release SUS voltages.
any hint?
Comment