Announcement

Collapse
No announcement yet.

GTX1070 8GB - all voltages ok but card not detected

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    GTX1070 8GB - all voltages ok but card not detected

    Hello.
    Have this GTX1070 8GB that have all voltages ok but card is not detected

    i flash bios, do reflow, but still no detection

    any hint?

    #2
    Re: GTX1070 8GB - all voltages ok but card not detected

    Try it using a mining adapter in single PCIe lane mode - does it detect?

    Does it try to read the BIOS? Check CS or EN pin on the GPU BIOS chip (it's probably pin 1)

    I hope you used a proper profile to reflow the GPU, unless you mean you just heated it up, not enough to melt the solder, which is not a reflow of course
    Follow me on YouTube
    ------------------
    Learn Electronics Repair
    https://www.youtube.com/channel/UCFX...R8UZ2vg/videos

    Comment


      #3
      Re: GTX1070 8GB - all voltages ok but card not detected

      You can also check the first pci express lane in diode mode, and the 220nf capacitors for it.

      Comment


        #4
        Re: GTX1070 8GB - all voltages ok but card not detected

        BIOS - only blink of voltage on EN pin and stays low, no activity - WHY?


        pcie lines and capacitors - ok

        Comment

        Working...
        X