Compaq presario V6000 schematic

[salawayon]

I'm requesting for the schematics of presario v6000. With motherboard label DA0AT3MB8F0 rev. F.... My problem with this unit is that the supply line is only present at PL4, PQ61 (4430), and also at PU1 (max8724E) i can measure some voltages (1.2, 3.3, 5vdc)... No voltage present at ENE KB3926QF. With that status only charging light at charging port is only visible.

Thanks...

[spidey]

Re: Compaq presario V6000 schematic

check also pl12 and pl14 if there is +5v and +3.3V. if there is not focus on this circuit. And also measure the current on standby.

[salawayon]

Re: Compaq presario V6000 schematic

does hp dv6000 and compaq presario v6000 got the same schematics?

[salawayon]

Re: Compaq presario V6000 schematic

just to update only... this unit was repaired... the main problem was the defective PD16 (CH501H)... where the 18.5vdc input voltage (@pin 2) being dropped to 10vdc....

thanks for the schematics....

[ScotchArg]

Re: Compaq presario V6000 schematic

thank you for the tip, you r a genius!

[ScotchArg]

Re: Compaq presario V6000 schematic

just to update only... this unit was repaired... the main problem was the defective PD16 (CH501H)... where the 18.5vdc input voltage (@pin 2) being dropped to 10vdc....

thanks for the schematics....

thank you for the tip, you r a genius!