New caps on stock

[Behemot]

New caps arrived - Nippon Chemi-Con KZH 1000 uF/16 V in D8×20 mm (EKZH160ETC102MH20D). Finally a suitable replacement for those D8 crapxons in PSUs and some high-capacity replacement for craps in displays! Pricing coming soon, they forgot to send me invoice…well not that I would complain

Other than that, I have samples of Rubycon YXJ 33 uF/50 V, the only low-ESR 33uF/50V caps in D5×11 mm! Anybody would be interested in these? I need other caps as well and as the distributor wants money-in-front for the first order, I have to choose which ones I will order, I don't have money for all.

[Behemot]

The price is on the web. I should also get (tomorrow or on monday) 100 pcs of NCC KXJ 10 uF/400 V in D10×16 mm, suitable into set-top boxes, satellite receivers, small SMPS AC-DC adapters, LED lights etc.

[Behemot]

I got 135 pcs of those KXJ 10/400 D10×16 after all

I am also able to get Rubycon MFZ 2700 uF/6,3 V ATM.

[Behemot]

NCC KYA 3300 uF/6,3 V D10×25 mm on stock, 1000 pcs, bagged packing (no ammo-belt!).

[Behemot]

Rubycon MFZ 2700 uF/6,3 V on stock!!

[Behemot]

Nippon Chemi-Con KZN 3300 uF/16 V D10×40 mm on stock now!!!
Nippon Chemi-Con KZN 1500 uF/6,3 V D8×20 mm on stock now!!
Nippon Chemi-Con KXJ 150 uF/400 V D18×40 mm on stock now!

[Behemot]

Rubycon YXJ 220 uF/25 V D6,3×11 mm on stock now!!

[Behemot]

Here are some images. Note the KYA 3300/6,3 are samples with worse font quality, actual product from ordinary manufacturing line is as should be, consistent with NCCs font type.

[Behemot]

NCC KYA 1000 uF/25 V stock is running low, I have ordered KYB with slightly lower ESR and higher ripple current. KZH 680 uF/16 V D8×15 mm are also being manufactured ATM.

[ReeceyBurger123]

Originally Posted by Behemot

NCC KYA 1000 uF/25 V stock is running low, I have ordered KYB with slightly lower ESR and higher ripple current. KZH 680 uF/16 V D8×15 mm are also being manufactured ATM.

I have ordered some 1000uf 16v 8mm d Kzh off you, are they suitable for motherboards ?

[Behemot]

They are not motherboard grade, but such are not being made anymore. If that is on the input side of VRM (=output from PSU), it should work. Compared to Rubycons MBZ it is not that far.

However, I would not recommend overclocking or any similar way of increasing the VRMs load.

[ReeceyBurger123]

Originally Posted by Behemot

They are not motherboard grade, but such are not being made anymore. If that is on the input side of VRM (=output from PSU), it should work. Compared to Rubycons MBZ it is not that far.

However, I would not recommend overclocking or any similar way of increasing the VRMs load.

I was going to swap the from ucc kzj to ucc kzh, I may just use the kzes I have on order.

[Behemot]

The KZE are almost the same as KZH, the difference in ESR is only minor. Those are too power supply caps, not motherboard. But such are often used on VRM input (while sometimes there are ultra-low ESR caps instead) so it should be OK with both. Definitelly better than bulging caps

Got some new caps on stock, NCC KZH 680/15 D8×15 and KYB 1000/25 D10×20 instead of KYA as they have lower ESR and higher current.

More new caps being manufactured!

[Behemot]

Got more KZH 1000/16 so no problem with supply. Also the RUbycons LLE 3,3/400 D8×11,5 mm.

But KYA 680/35 have run out, KYB 680/35 D10×20 mm are on their way (gonna get them in september or so).

[Behemot]

All caps have been moved to Bonanza, see the news http://www.hardwareinsights.com/wp/c...one-with-ebay/

Maybe the most exclusive ones will be re-listed on eBay in time, but I would prefer you using Bonanza if you have to use such service in the first place as you can contact me directly and soon e-shop will be finally started (at least in testing mode).

As for capacitor news, I am getting some new samples around next week and in a few weeks new models will finally arrive.

[Behemot]

New caps available! Finally got the KYB 680/35 D10×20 mm, KZH 1200/6.3 D8×15 and KYB 2200/16 D10×30 mm.

The KYB 2200/16 have 2.5times the life of Panasonic FK and compared to Distrelec I have them for 1/4 the price. Still going to buy overpriced crap? Digi-Key has these too, two times more expensive than me.

[mockingbird]

Originally Posted by Behemot

New caps available! Finally got the KYB 680/35 D10×20 mm, KZH 1200/6.3 D8×15 and KYB 2200/16 D10×30 mm.

The KYB 2200/16 have 2.5times the life of Panasonic FK and compared to Distrelec I have them for 1/4 the price. Still going to buy overpriced crap? Digi-Key has these too, two times more expensive than me.

Nice!

You know I need these but can't place an order for a while.

[Behemot]

Yeah np. BTW I won't be selling on fuckbay again, they even wanted me to prove my card for fees again? They kidding? First, I don't want to give them my card at all, pricks, but german does not accept paypal. I don't even want german fuckbay registration at all but the idiots don't let you change that! So it will be all yours to sell on.

BTW colleague told me we got 180 days for PP claim so he started one. After 11th we can escalate, so far nobody responded.

[Behemot]

Colleague of mine is going to Fermilab again so if you guys in US want some caps or anything else he can take with him let me know! You got a week.

[Behemot]

Dirty cheap KYB 1500/16 D10×20 and KZN 100/35 D6.3×11 mm have arrived!