hi, when I turn on the relay with the remote control it clicks, the voltages are present 3.5v-12v-24v but after 3 seconds the relay clicks again and the PSU goes into standby
thanks, I had already tried with lvds cable disconnected without result, at the moment I do not have the remote control as soon as I find it I do the test
I performed the smps2 test by making the bridge between pins 1 and 3 (pwr-on) and one between pins 2 and 5 (drv-on) of P2300, connecting the power supply the panel shows in sequence the colors red, blue, green, white, full screen
Comment