Announcement

Collapse
No announcement yet.

HP 15 ab584tx thermal shutdown due to IC overheating

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    HP 15 ab584tx thermal shutdown due to IC overheating

    Model: HP pavilion 15 ab584tx
    Issue: Thermal shutdown (Boot screen Error Code:90D)

    I did the initial cleaning and repasting, but it would still shut down. I managed to narrow down the problem to the IC APW8858 overheating. I had the IC replaced, but within a few hours, the new IC was short. The local technician I gave it to says it may be an inherent CPU/GPU issue and may need a motherboard replacement. I want to make sure that if this board can be resurrected or it is gone beyond repair.

    I'd appreciate any help or guidance on this issue. Thank you very much!
    Last edited by hp15ab; 07-31-2020, 01:40 AM. Reason: Added some clarity regarding my problem

    #2
    Re: HP 15 ab584tx thermal shutdown due to IC overheating

    What is the mb code??

    Comment


      #3
      Re: HP 15 ab584tx thermal shutdown due to IC overheating

      no schematics available.. try to post all the power rail.. and alw.. maybe theres a short somewhere that is why IC APW8858 is overheating a power management ic.. hp15 with i7 6th gen pro. with built in graphics and separate nvdia bga graphics ic.. APW8858 powers the i7 processor.. focus there.. maybe a short mosfets .. i7 processor rarely fail but there is always an exemption .
      Never stop LEARNING because life never stops TEACHING!

      Comment

      Working...
      X