Hello,
I purchased an Asus F556LJ laptop with waterdamage - board X555LJ.
I removed water damage and device worked. But when it was dry, It didn't work anymore. When I put one drop of isopropanol on the area right of KBC chip, device works, but doesn't start on battery.
When device doesn't start (dry condition), +3VA_EC is not present, but as far as I see, theres no short in line. Both KBC and soft start unit for KBC VCC have been reflowed.
Someone has a schematic / boardview of this particular board? (i5-5200U, GeForce 920M).
Bios was already flashed using the BIOS internal program.
Thanks in advance.
I purchased an Asus F556LJ laptop with waterdamage - board X555LJ.
I removed water damage and device worked. But when it was dry, It didn't work anymore. When I put one drop of isopropanol on the area right of KBC chip, device works, but doesn't start on battery.
When device doesn't start (dry condition), +3VA_EC is not present, but as far as I see, theres no short in line. Both KBC and soft start unit for KBC VCC have been reflowed.
Someone has a schematic / boardview of this particular board? (i5-5200U, GeForce 920M).
Bios was already flashed using the BIOS internal program.
Thanks in advance.
Comment