have diagonal lines, have solid red standby, comes on makes the little samsung noise, tried a different tcon, gave exact same screen image, can't get a menu, using a samsung remote from a different tv, not sure if that matters, wonder if it's the a board?, Thanks.
Announcement
Collapse
No announcement yet.
samsung LN-S4051D diagnal lines
Collapse
X
-
Re: samsung LN-S4051D diagnal lines
Originally posted by sordids999 View Posttry in standby info/menu/mute then power on tv to access service menuLast edited by nomoresonys; 12-18-2014, 11:04 AM.
Comment
-
Re: samsung LN-S4051D diagnal lines
Originally posted by nomoresonys View PostI did notice on the a board the 2 caps, one on each side of IC401 are curious, I can see the x but they don't look broken.
Comment
-
Re: samsung LN-S4051D diagnal lines
Originally posted by nomoresonys View PostI did notice on the a board the 2 caps, one on each side of IC401 are curious, I can see the x but they don't look broken.
Comment
-
Re: samsung LN-S4051D diagnal lines
Originally posted by nomoresonys View Postjust wondering which part on digikey is the correct one?, Thanks.
Comment
-
Re: samsung LN-S4051D diagnal lines
Originally posted by mmartell View PostThose are not "snap in" caps they are surface mount and they are probably ok and not your problem. Try heating the main board with a hair dryer and see if anything changes.
Comment
-
Re: samsung LN-S4051D diagnal lines
Originally posted by mmartell View PostThose are not "snap in" caps they are surface mount and they are probably ok and not your problem. Try heating the main board with a hair dryer and see if anything changes.
Comment
-
Re: samsung LN-S4051D diagnal lines
anyone know what those diagonal lines could mean, cant get a menu either, thanks.Last edited by nomoresonys; 12-26-2014, 10:25 PM.
Comment
Comment