Wrong mainboard

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • jay459
    New Member
    • Mar 2018
    • 6
    • Uk
    #1

    Wrong mainboard

    This mainboard was to supposed to fit my 60uf770v tv but it does not. Only one lvds socket and cable from tcon to main board not there.

    Should I send back or could this be soldered on to work.

    Missing heatsink aswell by the looks beside big silver one
    Attached Files
    Tags: None
    • diif
      Badcaps Legend
      • Feb 2014
      • 6978
      • England
      #2
      Re: Wrong mainboard

      Yes it is the wrong mainboard. It's missing the memory that goes under the heatsink too. The firmware will also be different.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • alltvrepairs
          Samsung QE65Q60TAUXZT New Mainboard but wrong colours
          by alltvrepairs
          Hi,
          I have ordered a new main from Samsung. Tv works fine but colours are wrong. I have updated the Panel type as per panel sticker but made no difference. I have another spare good main board and copied the SPI data to the new board but still same problem.

          I have attached pics to what difference I have found a difference n the Tcon value as per (2). However haven't found from where I can modify this value. Note I have entered SM with normal remote. Currently I do not have Factory remote.
          Do we have a Service Manual for this please?

          Any assistance welcome!...
          04-18-2023, 02:37 AM
        • harp
          Metod for removing glued heatsink from fragile component
          by harp
          I have peltir element glued to heatsink with something thick and sticky like putty... it cant be separate with force or heat without risk of breaking ceramic or damaged semiconductor layers due to force (eg if try twisted, pulled, lifted)... method that I am using is a single thread for needle (thin and firm thread of pure polyester that cant break with bare hands without glowes), and using it like a saw between heatsink and peltir. I holding a heatsink with knee against table. It slowly cut throug putty and release glued parts. It is slow proces, but preserve undamaged component and heatsink....
          06-23-2025, 02:01 PM
        • Mirenia
          Dell Latitude 7420 - Touchscreen not working since Mainboard replacement
          by Mirenia
          Hi everyone,

          I've got a little "problem child": my Dell Latitude 7420 2-in-1, which had a faulty mainboard.
          I replaced it, but ever since, the touchscreen no longer works — and honestly, I’m running out of ideas…

          In Windows Device Manager, I just see an I2C HID Device with error code 10. Sporadically, the touchscreen is recognized correctly for just a few seconds, but I haven’t been able to determine under which circumstances this happens.

          The touchscreen also doesn’t work in UEFI/BIOS, although it’s enabled...
          03-30-2025, 06:47 AM
        • orcic
          MASTER TL240 and new mainboard LW36BKC01
          by orcic
          Hello,
          I have an old MASTER TL-240 LED TV. Since it stopped working and it had a DVB-T receiver that is being dismissed in Italy, I've decided to replace the mainboard with a DVB-T2 one.
          The original problem was that when switching on the TV, the power LED was transitioning from red to steady blue, without showing video or audio.
          After checking some voltages on the power supply board (HKL-240101-B Rev. 1.4, HKL from now on) someone suggested me to replace the mainboard.
          Now I have some doubts about how to connect the new mainboard to the old power supply.
          First of...
          05-12-2023, 08:10 AM
        • Ven
          Seeking Advice on Enhancing Heatsink for Main Processor on SAMSUNG TV Motherboard
          by Ven
          Hello everyone,

          I'm looking to upgrade the heatsink on the main processor of my TV's motherboard for better cooling performance.

          The current heatsink is a square-shaped one (2.8cm x 2.8cn) with a basic design, and I believe a more efficient heatsink could help with thermal management and potentially extend the life of the TV.

          I'd appreciate any advice on the best type of heatsink to use, specific product recommendations, and tips for installation.

          If you've done a similar upgrade, I'd love to hear about your experience and any challenges you...
          1 Photo
          07-08-2024, 09:32 AM
        • Loading...
        • No more items.
        Working...