Here is the story....>>>
Tuesday of this week I got a text from some good friends of my son
We had a really bad thunderstorm that came throught made the power go ON and OFF a few time .....>>>
Well after the power came back on for good the Refrigerator would NOT turn back ON and run
This is one of the newer models that has a micro controller that controls everything
This Refrigerator is DEAD no LIFE other than the light in side the frigate part and the light in freezer
So took a look at the control board and what do I see is a TOP246YN offline IC switcher on this board and a BYW29-200G UL fast 200 v 8A Diode and two caps next to the Switcher IC one was a 47 uf no ESR value at all 1 uf 50 ohms that is not a misprint
Replaced the IC switcher and the Diode and the two caps
Put the control board back in the Refrigerator and everything came back to life
BTW this control board retail for $190.00
I got all the part from Digi-key for $15.00 and ordered 3 switcher IC and 2 diodes It took about two hours pull these parts and change them because they coated the board with what look like hot glue
Tuesday of this week I got a text from some good friends of my son
We had a really bad thunderstorm that came throught made the power go ON and OFF a few time .....>>>
Well after the power came back on for good the Refrigerator would NOT turn back ON and run
This is one of the newer models that has a micro controller that controls everything
This Refrigerator is DEAD no LIFE other than the light in side the frigate part and the light in freezer
So took a look at the control board and what do I see is a TOP246YN offline IC switcher on this board and a BYW29-200G UL fast 200 v 8A Diode and two caps next to the Switcher IC one was a 47 uf no ESR value at all 1 uf 50 ohms that is not a misprint
Replaced the IC switcher and the Diode and the two caps
Put the control board back in the Refrigerator and everything came back to life
BTW this control board retail for $190.00
I got all the part from Digi-key for $15.00 and ordered 3 switcher IC and 2 diodes It took about two hours pull these parts and change them because they coated the board with what look like hot glue
Comment