Re: HP EliteDesk 800 G2 Small Form Factor PC bios request
Those clips are shit,thats maybe why you didn`t get a good bios read the first time.Desoldering is the best way,then use an adapter. I don`t know much about the programmer you`re using either.Most members here buy the CH341A ,its not a bad programmer if used with alternative software.
If you havn`t got a hot-air station then you can still desolder the chips using a temperature controlled soldering iron,if you have one .
Originally posted by alexdc
View Post
If you havn`t got a hot-air station then you can still desolder the chips using a temperature controlled soldering iron,if you have one .
Comment