Badcaps.net Forum
Go Back   Badcaps Forums > Troubleshooting Hardware & Devices and Electronics Theory > Troubleshooting TVs and Video Sources
Register FAQ Calendar Search Today's Posts Mark Forums Read

 
Thread Tools Display Modes
Old 09-26-2022, 02:34 PM   #1
totof
Member
 
Join Date: Feb 2017
City & State: paris
My Country: france
I'm a: Knowledge Seeker
Posts: 42
Default Samsung UE50KU6070 black screen

Hello,
I have my TV model UE50KU6070 which I am trying to repair.
BN41-02528A / BN94-10800C motherboard.
If I disconnect the motherboard from the power board, the backlight works. When the motherboard is connected the backlight works but the screen remains black.
When I plug the TV into the electrical outlet, the standby LED lights up but no reaction to an attempt to start it with the remote control for about 1 minute. During this minute the TV consumes about 20W.
After one minute the consumption drops to 0W and the TV can turn on with the remote control but the screen remains black. All voltages on the motherboard are correct.
The TV turns off with the remote control but you have to wait about 1 minute before restarting it again. Sometimes at startup the screen displays "Samsung Smart TV" for 1 second before going black.
In fact, in addition to the black screen, it is as if the TV was extremely slow.
The behavior is the same if I disconnect the two LVDS cables.

Do you have an idea of ​​the problem and do you think that the motherboard is repairable for example by reprogramming the memory?

Thank you in advance for your help.
totof is offline   Reply With Quote
Old 09-26-2022, 03:44 PM   #2
CapLeaker
Leaking Member
 
CapLeaker's Avatar
 
Join Date: Dec 2014
City & State: Atlantic Canada
My Country: Canada
Line Voltage: Ground, 0Hz
I'm a: Hobbyist Tech
Posts: 5,356
Default Re: Samsung UE50KU6070 black screen

Reflash the SPI or whatever it is. Looks like a good candidate, at least it’s worth a try if you can find a dump file. Also check the SPI first, before you put a new file on. Not that you have a bad one.
CapLeaker is offline   Reply With Quote
Old 09-27-2022, 02:54 PM   #3
totof
Member
 
Join Date: Feb 2017
City & State: paris
My Country: france
I'm a: Knowledge Seeker
Posts: 42
Default Re: Samsung UE50KU6070 black screen

Thank you CapLeaker.
Attached the SPI file but i have no idea whether the content is valid or not.
Attached Files
File Type: zip UE50KU6070K_backup_original.zip (54.7 KB, 7 views)

Last edited by totof; 09-27-2022 at 03:31 PM..
totof is offline   Reply With Quote
Old 09-27-2022, 05:59 PM   #4
CapLeaker
Leaking Member
 
CapLeaker's Avatar
 
Join Date: Dec 2014
City & State: Atlantic Canada
My Country: Canada
Line Voltage: Ground, 0Hz
I'm a: Hobbyist Tech
Posts: 5,356
Default Re: Samsung UE50KU6070 black screen

read the spi, save a copy, FF the spi and check it. Hopefully it is still good, then all you need is a working dump.
CapLeaker is offline   Reply With Quote
Old 10-01-2022, 05:28 AM   #5
totof
Member
 
Join Date: Feb 2017
City & State: paris
My Country: france
I'm a: Knowledge Seeker
Posts: 42
Default Re: Samsung UE50KU6070 black screen

SPI seems good, I wrote FF without problem
totof is offline   Reply With Quote
Old 10-02-2022, 09:19 AM   #6
Davi.p
Badcaps Veteran
 
Davi.p's Avatar
 
Join Date: Sep 2009
City & State: Milan
My Country: Italy
I'm a: Hobbyist Tech
Posts: 2,712
Default Re: Samsung UE50KU6070 black screen

it is not a memory problem, must be checked the entire psb with dummy loads
Davi.p is offline   Reply With Quote
Old 10-04-2022, 01:44 PM   #7
totof
Member
 
Join Date: Feb 2017
City & State: paris
My Country: france
I'm a: Knowledge Seeker
Posts: 42
Default Re: Samsung UE50KU6070 black screen

Quote:
Originally Posted by Davi.p View Post
it is not a memory problem, must be checked the entire psb with dummy loads
It is very interesting but I don't know how to this check.
All the voltage on self components seems good.
totof is offline   Reply With Quote
Old 10-04-2022, 03:39 PM   #8
Davi.p
Badcaps Veteran
 
Davi.p's Avatar
 
Join Date: Sep 2009
City & State: Milan
My Country: Italy
I'm a: Hobbyist Tech
Posts: 2,712
Default Re: Samsung UE50KU6070 black screen

you don't know ohm's law? It's hard starting whatever repair without it , must collect some power resistors and a lamp..
Davi.p is offline   Reply With Quote
Old 10-05-2022, 02:00 PM   #9
totof
Member
 
Join Date: Feb 2017
City & State: paris
My Country: france
I'm a: Knowledge Seeker
Posts: 42
Default Re: Samsung UE50KU6070 black screen

Thank you Davi.p
For the ohm's law it should be fine but the problem is that without a diagram of the card it is very difficult for me to know what to test.
I have already checked all the voltages on the inductance and they are OK. No shorted capacitors either.
What I would like to test are the signals to the LVDS cable but without a diagram it's complicated
totof is offline   Reply With Quote
Old 10-05-2022, 03:49 PM   #10
nomoresonys
Badcaps Veteran
 
Join Date: Jan 2013
City & State: midwest
My Country: U.S.
I'm a: Knowledge Seeker
Posts: 8,802
Default Re: Samsung UE50KU6070 black screen

backlights and powerboard are fine, proved by results of first post.
nomoresonys is online now   Reply With Quote
Old 10-05-2022, 03:54 PM   #11
nomoresonys
Badcaps Veteran
 
Join Date: Jan 2013
City & State: midwest
My Country: U.S.
I'm a: Knowledge Seeker
Posts: 8,802
Default Re: Samsung UE50KU6070 black screen

maybe try the tape cut-off method just for fun, never know when it will work.

Last edited by nomoresonys; 10-05-2022 at 04:01 PM..
nomoresonys is online now   Reply With Quote
Old 10-05-2022, 04:07 PM   #12
nomoresonys
Badcaps Veteran
 
Join Date: Jan 2013
City & State: midwest
My Country: U.S.
I'm a: Knowledge Seeker
Posts: 8,802
Default Re: Samsung UE50KU6070 black screen

Capleaker probably nailed it with post #2, eeprom/spi/nand dead.
nomoresonys is online now   Reply With Quote
Old 10-06-2022, 04:27 AM   #13
Davi.p
Badcaps Veteran
 
Davi.p's Avatar
 
Join Date: Sep 2009
City & State: Milan
My Country: Italy
I'm a: Hobbyist Tech
Posts: 2,712
Default Re: Samsung UE50KU6070 black screen

maybe we don't understand ourselves, i suggested you to test the power supply outputs, that are usually marked on board each signal, put a resistor on the 5v, a lamp on 12v and so on..
Davi.p is offline   Reply With Quote
Old 10-08-2022, 03:14 PM   #14
totof
Member
 
Join Date: Feb 2017
City & State: paris
My Country: france
I'm a: Knowledge Seeker
Posts: 42
Default Re: Samsung UE50KU6070 black screen

I rechecked all the voltages on self and they are good.
VON, VCCA, VCCB and AVDD voltages are also correct.
I just bought another motherboard pulled from a broken TV and the TV works again.
totof is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



Badcaps.net Technical Forums 2003 - 2022
Powered by vBulletin ®
Copyright ©2000 - 2022, Jelsoft Enterprises Ltd.
All times are GMT -6. The time now is 06:30 AM.
Did you find this forum helpful?