Hello,
I used this TV (Philips 40PFL4707/F7B) very little and is now out of warranty, and when I turn it on, the Philips logo flashes for an instant and then no picture, no menus, nothing. Sound works fine.
As recommended, i held a flashlight next to the screen and I could (barely) see the image moving. So I removed the back cover, and found there is one inverter board on the left side (many sites mention there should be two, but this one has only one). When I searched online, this is called a LED driver.
I replaced it (ssl400 0e2d) with a new one I purchased online, but the exact problem persists. So i will be returning it on monday.
Any ideas on how I should proceed? What could be the problem then?
thanks in advance for your help
Tony
I used this TV (Philips 40PFL4707/F7B) very little and is now out of warranty, and when I turn it on, the Philips logo flashes for an instant and then no picture, no menus, nothing. Sound works fine.
As recommended, i held a flashlight next to the screen and I could (barely) see the image moving. So I removed the back cover, and found there is one inverter board on the left side (many sites mention there should be two, but this one has only one). When I searched online, this is called a LED driver.
I replaced it (ssl400 0e2d) with a new one I purchased online, but the exact problem persists. So i will be returning it on monday.
Any ideas on how I should proceed? What could be the problem then?
thanks in advance for your help
Tony
Comment