Announcement

Collapse
No announcement yet.

XGecu TL866II Plus not reading and not writing

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    XGecu TL866II Plus not reading and not writing

    Hello,
    I bought a TL866II Plus eeprom programmer, I tried to read an Eeprom 24lc64 ( MANUFACTURING MICROCHIP ) the software Xgpro v11.50 don't show me any error in the read but the file read is empty.
    I tried to program and I receive an error. I tried with a different chip but I had the same result. Anyone can give me help please?
    Attached Files
    Last edited by pippo-pitbull; 10-26-2021, 08:23 PM.

    #2
    Re: XGecu TL866II Plus not reading and not writing

    I am not familiar with that EXACT unit but maybe try to be sure the USB/serial port is properlay set? verify the COM port and the settings / speed - some use a software serial emulation over usb or use an actual SERIAL cable.

    Comment


      #3
      Re: XGecu TL866II Plus not reading and not writing

      I checked in device manager and in the software configuration but I didn't find any speed configuration.
      If I send a blank file, I don't receive any error from the programmer.

      Comment


        #4
        Re: XGecu TL866II Plus not reading and not writing

        Problem solved.
        The right number of the Eeprom was 25LC640.
        Thanks

        Comment

        Working...
        X