Hello all
Machine is an HP Envy x360 convertible.
Model 15-ds0004nf
board info
Pacific Ocean Rota 15 Picassco
18747-1
448.0gb16.0011
Im working on this motherboard, can check the other thread here.
https://www.badcaps.net/forum/showth...ht=15-ds0004nf
I was able to get the board to a better condition after replacing KBC, 3.3V and 5V ics
But it still does not power on
As ive replaced the ENE kb9028g , I think it needs programming
Has anyone a dump for the KBC for this model?
Im using Vertyanov Jig, when I try to read/save the kb9028g I have a lost communication error...not sure why
When I have a dump I will test
Thanks!
Machine is an HP Envy x360 convertible.
Model 15-ds0004nf
board info
Pacific Ocean Rota 15 Picassco
18747-1
448.0gb16.0011
Im working on this motherboard, can check the other thread here.
https://www.badcaps.net/forum/showth...ht=15-ds0004nf
I was able to get the board to a better condition after replacing KBC, 3.3V and 5V ics
But it still does not power on
As ive replaced the ENE kb9028g , I think it needs programming
Has anyone a dump for the KBC for this model?
Im using Vertyanov Jig, when I try to read/save the kb9028g I have a lost communication error...not sure why
When I have a dump I will test
Thanks!
Comment