Hi, possible because we have to try with many differents software for the CH341A and only the 1.29 version give this file from read button.
With the 1.30 version we get an error message "access violation at address 0097ea42"
Its 3V . Try AsProgrammer software it works ok with the CH341A. Choose SPI on the right side at the top, then from the dropdown menu at the top left,choose SPI then winbond 25Q128FV .Are you using a clip or have you desoldered the chip.
---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters.​ ----------------------------------------------------------------------------------------------------------------------------------------------------------
Thank you so much.
I'm new in this practice so now what i need to do ? just write the bios with this file or erase bios before or other thing ?
First erase the chip, than write the rom file to the chip, than verify written file, and then solder the chip back to the board.
---------------------------------------------------------------------------------------------------------------------------------------------------------- All donations to Badcaps are welcome. Become a Badcaps supporter >>>>>click on this link to donate <<<<< Thanks to all supporters.​ ----------------------------------------------------------------------------------------------------------------------------------------------------------
Comment