Trying to figure out why I have no power on this board.
I’ve got power coming in from original charger fine, 1st 2nd mosfets seem fine.
I’ve got no voltages on the bios chip on any of the pins including the vcc
I’ve got 3.3v on the power button connector and does drop to 0 when pressed
I’ve noticed at a pair of mosfets I have got 19v at drain but nothing on the opposite end so kind of thinking I have a issue here
The mosfet after that has 100ohm resistance between drain and source.
Just wanted to make sure I’m on the right track and anything else to check
I’ve got power coming in from original charger fine, 1st 2nd mosfets seem fine.
I’ve got no voltages on the bios chip on any of the pins including the vcc
I’ve got 3.3v on the power button connector and does drop to 0 when pressed
I’ve noticed at a pair of mosfets I have got 19v at drain but nothing on the opposite end so kind of thinking I have a issue here
The mosfet after that has 100ohm resistance between drain and source.
Just wanted to make sure I’m on the right track and anything else to check
Comment