Hi
Got my Panasonic plasma tv that stopped working suddenly.
Took out the cover all the leads from the powr baord in the middle apart of the main 220AC. and measured Vsus and 15V DC on P2 and P11 connector. Found nothing. Concluded it is the board
Replaced with a second hand one but still the same issue.
Cannot see the 5V or the 15V on the board with or without all the other leads attached.
Here is an example of what I have measured on P6 connector (see the image).
3V DC on pin 6 (STBby 5V and
0,3V DC on pin 7 (F_stdby_on)
No lights on LED, no ticking sound or buzzing.
Please help
Could it be the main A board? I was expecting to see the 5V and the 15V DC on the power board even if the A board is defective or disconnected, am I right?
Any ideas anyone?
Got my Panasonic plasma tv that stopped working suddenly.
Took out the cover all the leads from the powr baord in the middle apart of the main 220AC. and measured Vsus and 15V DC on P2 and P11 connector. Found nothing. Concluded it is the board
Replaced with a second hand one but still the same issue.
Cannot see the 5V or the 15V on the board with or without all the other leads attached.
Here is an example of what I have measured on P6 connector (see the image).
3V DC on pin 6 (STBby 5V and
0,3V DC on pin 7 (F_stdby_on)
No lights on LED, no ticking sound or buzzing.
Please help
Could it be the main A board? I was expecting to see the 5V and the 15V DC on the power board even if the A board is defective or disconnected, am I right?
Any ideas anyone?
Comment