Hi guys i found that PU401 was heating , i found that 3vlp is in short so i removed solder from jp402
after removing i have on pin 13 3.3v
pl402 no out
and on pin 2 of jp402 is in short , if i inject 3.3 i get UEC1(KB9022)
can be ec in short ?
after removing i have on pin 13 3.3v
pl402 no out
and on pin 2 of jp402 is in short , if i inject 3.3 i get UEC1(KB9022)
can be ec in short ?
Comment