I got ahold of a bunch of these sets. Some have cracked screens, and the others were lightning strike victims. Simple enough to swap good mainboards for bad. Tvs power on and display the HDMI input. I can change it to tv, but I had to scan for digital channels. Tvs work just fine until I turn them off. They reboot to the RCA screen and then go to HDMI screen. When I change it to tv they start to autoscan for channels again. I cant find any info, or a manual on these sets. I'm thinking I might need a MASTER remote. Any ideas?
-
-
Re: RCA J40BE925 hospitality set
Seems they have master & Guest Remotes Separate remotes for configuration and
operation.I assume no responsibility for any stupid suggestions I might post. -
Re: RCA J40BE925 hospitality set
Does the mod# end in a 5 or 9 ...Comment
-
Re: RCA J40BE925 hospitality set
Here's the label.Attached FilesComment
-
-
Re: RCA J40BE925 hospitality set
They are hospitality sets. Hopefully the master remote control I ordered will reset them.Comment
-
Re: RCA J40BE925 hospitality set
To exit the set from COMMERCIAL mode :
Press menu
Go over to lock symbol and press the down button
Enter 0000 for the password
Set system lock to off
Go down to commercial menu and press ok change to off.
To stop the set from running the setup wizard every time the tv is turned on:
Press menu
Go over to the tv setting on the left
Go down to auto channel scan and set to off.
Comment
Comment