Announcement

Collapse
No announcement yet.

Substitute SEPC 820 for KZG?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Substitute SEPC 820 for KZG?

    My question is about substituting a Sanyo SEPC 820/4.0 for a bulged KZG 820/6.3.
    If this is not appropriate, it is better recommended to use 1000/6.3 instead?

    These are field caps, not located in the VRM.
    The board is a Dell 775 BTX from a Dimension 5150.

    I took a gamble and replaced the three bulgers, but the board is still living in Beeping Hell.
    This was a basket case dumped in my lap.
    It came without CPU, so I bought a $20 P4/650 off eBay.

    #2
    Re: Substitute SEPC 820 for KZG?

    If it gets less than 4v, then it will probably work.
    I love putting bad caps and flat batteries in fire and watching them explode!!

    No wonder it doesn't work! You installed the jumper wires backwards

    Main PC: Core i7 3770K 3.5GHz, Gigabyte GA-Z77M-D3H-MVP, 8GB Kingston HyperX DDR3 1600, 240GB Intel 335 Series SSD, 750GB WD HDD, Sony Optiarc DVD RW, Palit nVidia GTX660 Ti, CoolerMaster N200 Case, Delta DPS-600MB 600W PSU, Hauppauge TV Tuner, Windows 7 Home Premium

    Office PC: HP ProLiant ML150 G3, 2x Xeon E5335 2GHz, 4GB DDR2 RAM, 120GB Intel 530 SSD, 2x 250GB HDD, 2x 450GB 15K SAS HDD in RAID 1, 1x 2TB HDD, nVidia 8400GS, Delta DPS-650BB 650W PSU, Windows 7 Pro

    Comment

    Working...
    X