Re: Vizio VO47LF 0500-0407-0680 PS board
Not much since the IC is blown due to the fact that the Gate/Source was showing 1.8 Ohms, the high Voltage was high enough to break down the Gate/Source insulator inside the MOSFET (https://cdn.badcaps-static.com/pdfs/...a0d6f3418e.pdf) so that IC could not have survived.
You are better off with new power supply at this point.
Not much since the IC is blown due to the fact that the Gate/Source was showing 1.8 Ohms, the high Voltage was high enough to break down the Gate/Source insulator inside the MOSFET (https://cdn.badcaps-static.com/pdfs/...a0d6f3418e.pdf) so that IC could not have survived.
You are better off with new power supply at this point.
Comment