Announcement

Collapse
No announcement yet.

Vintage Pace desolder station PPS-100 pump motor bad

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Vintage Pace desolder station PPS-100 pump motor bad

    hi

    i jsut got this pace PPS-100 desolder solder station vintage for free

    the motor does not turn when powered on..it just makes some rumbling sounds thats it

    no replacements avail for reasonable price..

    is this fixable or maybe an alternate motor

    here is a pic of stock photo i found online

    #2
    Re: Vintage Pace desolder station PPS-100 pump motor bad

    nevermind i fixed the issue..motors works good now
    Attached Files

    Comment


      #3
      Re: Vintage Pace desolder station PPS-100 pump motor bad

      tell us what you found and fixed lol. The motor capacitor might be low value.

      Comment


        #4
        Re: Vintage Pace desolder station PPS-100 pump motor bad

        Sure..there is a plate on back of motor where vsc is...with a thin shim.metal gasket ..i took plate off pkate and motor turned fine by hand so i put plate and shim metal gasket back on ...it then worked...apparently it was bound up against the plate...from years of idled...my neighbor gave me it...its very interesting...even has a rotary tool..)
        Last edited by shelby5041; 04-16-2020, 01:54 PM.

        Comment


          #5
          Re: Vintage Pace desolder station PPS-100 pump motor bad

          I was looking for a replacement pump for the MBT 250, well more specifically the diaphragm overhaul kit, then unable to source that my thoughts turned to a replacement pump / motor assy and found prices for second hand units were not meeting with my approval. In the end was able to source a complete replacement controller at a very cheap price that did meet with my approval lol.

          Comment

          Working...
          X