i am using ch341a programmer.
at 1st the laptop is working but when i reprogram the bios with this programmer. it keep on saying chip with the contents are not the same even when i put the old dump. is my programmer bad? because i have been using this with winbond and it was doing good but with this chip xcm, i think its not working. my problem is that when i use
Last edited by tribalcore20; 12-02-2020, 04:14 AM.
i am using ch341a programmer.
at 1st the laptop is working but when i reprogram the bios with this programmer. it keep on saying buffer is not the same even when i put the old dump. is my programmer bad? because i have been using this with winbond and it was doing good but with this chip xcm, i think its not working.
There is some alternative better software you can use with the CH341A .NeoProgrammer ,AsProgrammer ,Colibri .You`ll find them all on the forum if you search. Always make 2 backups and verify they are both the same using a hex editors file compare function . HxD - https://mh-nexus.de/en/hxd/ .
There is some alternative better software you can use with the CH341A .NeoProgrammer ,AsProgrammer ,Colibri .You`ll find them all on the forum if you search. Always make 2 backups and verify they are both the same using a hex editors file compare function . HxD - https://mh-nexus.de/en/hxd/ .
Comment